Field Repair Press
 The
Industry Standard in Truss Repair since 1993
Eagle's Field Repair Press is the solution to those field repair
problems that every truss fabricator will eventually face. The FRP
enables users to repair broken trusses to a "like-new"
condition.
Plus, the FRP is a quick and easy press for adding a plate to trusses
that are missing one and have already left your production area.
This eliminates the need to bring it back into your shop where it
will disrupt production flow.
Eagle's FRP is the single, most versatile piece of equipment that
a truss fabricator can own. Bottom Line…Eagle's Field Repair
Press will pay for itself over and again for years to come. No truss
fabricator should be without one. And with more than 1,000 units
sold worldwide since its creation, it is the most popular piece
of truss equipment in the building component industry today.
There are 2 FRP Models to choose from:
FRP 15
The FRP 15 utilizes a smaller "C" frame that makes it
perfect for repairing roof trusses only. The FRP 15 is also widely
used as a backup or small production press and has proved invaluable
as a tool for shed and barn builders for fabricating their own
trusses.
FRP 35
The FRP 35 is built to repair BOTH roof and floor trusses. Its
widened "C" allows you to reach around 4" x 2"
floor webs, while its longest side remains under 12" in length,
allowing you to maneuver the press in virtually every floor truss
situation.
 FRP
15/35 Features
- Repairs both Roof and Floor Trusses
- New 1.5 HP Motor and Pump
- 10,000 psi of Pressing Power
- Pistol Grip Handle
- 4" x 4" Platens
- Magnets to Hold Plates in Position
- Automatic Shut-Off upon Switch Release
- Repositionable Handle
- Over 1,000 Sold Worldwide
|
